Skip to content
Documentation Menu

TC_F_07_CS — Remote unlock Connector - Without ongoing transaction - No cable connected

TC_F_07_CS — Remote unlock Connector - Without ongoing transaction - No cable connected

Source: OCPP 2.0.1 Part 6 — Test Cases (Core & Advanced Security, FINAL, 2023-06-30) — Functional block F. Remote Control, page 179.

Identification

FieldValue
Test case nameRemote unlock Connector - Without ongoing transaction - No cable connected
Test case IdTC_F_07_CS
Use case Id(s)F05
Requirement(s)F05.FR.01, F05.FR.06
System under testCharging Station
Functional blockF. Remote Control

Description

This test case describes how the CSMS can be requested to sent an UnlockConnectorRequest to the charging station. It sometimes happens that a connector of a Charging Station socket does not unlock correctly. This happens most of the time when there is tension on the charging cable. This means the driver cannot unplug his charging cable from the Charging Station. To help a driver, the CSO can send a UnlockConnectorRequest to the Charging Station. The Charging Station will then try to unlock the connector again.

Purpose

To verify if the Chargin Station is able to perform the remote unlock connector mechanism and report the result without ongoing transaction while no cable is connected as described at the OCPP specification.

Prerequisite(s)

The Charging Station has a connector lock.

Before (Preparations)

Configuration State:

  • N/a

Memory State:

  • N/a

Reusable State(s):

  • N/a

Main (Test scenario)

Charging StationCSMS
2. The Charging Station responds with a UnlockConnectorResponse1. The OCTT sends a UnlockConnectorRequest with evseId <Configured evseId> connectorId <Configured connectorId>

Tool validations

Step 2:

Message UnlockConnectorResponse

  • status Unlocked

Post scenario validations

  • N/a